Search results

Oops....sorry. Twin chargers would be nice as I have an i3 for my wife. But we are both retired so our milage is low and we probably only charge abount once or twice/week. I'm also luck we have a public charger about 200m from the house which is a government subsidised FREE charger.....so I'll...

Software version 0260 Hardware Version C20 You may not get the live analysis duing the installation wizard? - I can't remember. But it is there on mine now that it is installed. As this current reading is what drives the consumption on the overview page. You will of course have to set up 3...

I't part of the "home installation wizard" - the last menu....where you set up your mains phases, current sensors (where you also define the max), power source (only if you need to add more stuff about solar) and then the current consumer (the actual PMCC)

So you define the max current in the current sensor setup page (you do need to be logged in as the tech user.) See pic below. In my home I have a single phase 240v 100A supply. I have the current clamp 1 around my incoming supply measuring my live use. (you can see that is reading live...

What - surely you have an IP address for every lamp in the house? Doesn't everyone ;) ?

I'm afraind I am lucky as my garage (where the PMCC is mounted) is attached to the house, plus above the garage is my study where I have a wireless access point. The HEMS is next to my consumer unit on wired internet (the consumer unit is in my "Server Room") Being an IT geek, when I built...

Guys - just a big thanks to all....that manual about the web user interface from @W1NGE was the missing piece. Especially the last two pages which gives the overview of the comms I had the HEMS on wired internet and PMCC on WiFI. I believed I needed PLC between HEMS and PMCC as well. Truns...

Brill - I have loads of manuals in 100 languages on the HDMS and PMCC equipment - but nothing on the actual application! - So this may be a great source. From a user perspective - there is lots of info on the individual componenets - but little on the "eco-system" configuration that you are...

Yup - connected to the same consumer unit - although on separate MCB circuits. I've run powerline adaptors before for temp internet connections in the house on this wiring before and all fine. As mentined - I am a bit concerned at the HEMS being faulty? As it doesn't seem to respond to the...

Yeah - they are not huge distances - probably only 15-20m from my consumer unit to a dedicated 32A outlet in the garage. HEMS is connected right next to consumer unit. I've been distracted with "real work" - but will get back to this.....Thinking of doing a factory reset on both units and try...

Quick update - PLC light has gone back out on the HEMS :( Trying to relink the HEMS and PMCC... The PLC button on the front of the HEMS seems not to activate pairing? But I seem to be able to activate pairing in the HEMS web app....but the PMCC does not seem to be pairing.... Here goes another...

So update - thanks for everyones help. I installed a dedicated 32A curcuit to the garage and connected up the PMCC. And this time I just hit the PLC button on the HEMS and then pressed pair on the PMCC menu and they connected. Not sure why this hadn't been going before....I think I was trying...

Thatnks for all the help.... Regards domestic 3 phase in the UK - I know it may be possible - but probably not viable. And I know the HEM is overkill....but I have it - so I may as well set it up (because I'm a geek). I think my root problem was getting the HEM and PMCC linked on PLC. I...

Brill - thanks guys. I've set aside tomorrow to install the 32A cuircuit to my garage, so will then try more with setting up the PLC comms.

Yeah - I wouldn't have specified it.....but I couldn't wait a year for a new Taycan - so got a pre-owned, and I think it was pre-owned internally by Porsche UK. And it came with everything PMCC and HEM, so I thought I'd install that instead of getting a Zappi or similar. It was all in the...

Cheers, will give this a try later. When I press the PLC button on the front of the Energy Manager - I'm not seeing any lights flashing or anything....should I? Also, do I need PLC DHCP turned on? The energy Manager is connected to my LAN via wired ethernet - so I can access the web admin page.

I 'm setting up my home charging and the car came complete with Home Enegry Manager and PMCC. Can't find any decent tutorials on this....I think I have most things on the Home Energy Manager setup..... But confused over PLC comms. Do I need to connect the Home Energy Manager to the PMCC via...

I'm new! Day 2 with my Mamba Green 4s :) The lovely team from Porsche Glasgow sourced one with 3000miles - saved me waiting a year. The package came with the Mobile Charger Connect. Included in that was a standard 13A plug as well as a blue 32A single phase plug. So before I go and get a...