Search results

The bolt that acts as a catcher is an m6 with 10mm head. The distance from the middle of that bolt to the end of the tube is 42mm. In my quick photoshop i made it look like the distance is from the end of the tube to the side of the bolt but this needs to be the center of the bolt.

Zou ik persoonlijk niet doen. Als er dan iets mis gaat weet je zeker dat de verzekering dit niet zal dekken. De weerstand van het water kan die 350kg ook aanzienlijk verhogen. Geen idee of de beugels in het frame van de auto zelf daar voor gemaakt zijn. Mijn beugel kan het wel hebben daar...

Hi, This is plastidip spray. I applied it myself including the masking tape. The masking takes a lot of time but when that is done the plastidip is applied in a few layers which takes an hour or two. Supper easy! I did this in august of 2023 and have used the wheels on multiple trips now...

Sorry for my late reply. It’s a very busy season for my company ? I would not use Stainless Steel. Price is not worth it. I have mine made from regular steel and had it powder coated for outdoor use. Have had no issues at all in the last 2 years.

Just wanted to share my take on the aero wheels. I will call this my range setup and Sport Plus with the 21” Vossen HF5 ? I used Plastidip on the center part of the wheel and a lot of masking tape. Looks pretty good if you ask me. We will go to the Alps next week and wanted max range and some...

It´s steel and you push in and lock it in place when you rotate it to horizontal level.

Great! looks a lot like mine ;-) https://www.taycanforum.com/forum/threads/my-custom-hitch-for-standard-bike-rack.12042/page-3#post-224617

Thanks but that's not needed on this rack.

Steel and a special double coating made for outdoor use.

I think that won't be a problem but keep in mind that mine was made on the car. That means they made the tubing and welded it on one side and made the final bending on the car to get a perfect fit. If they make a new one, have it coated and then for some reason it won't fit you have a big...

I have no Idea. The metal factory that does a lot of work for my company had it in stock. So I think it is not a rare item to get. But then again, what do I know :-) Maybe at the moment this diameter is harder to get with everyting in the world being out of stock?

Ok guys, Here is the design..... finally ;-)

Hi, I ordred it with the option for the OEM bike rack. If you don´t do that in The Netherlands you don,t get the wiring etc. installed for the lights.

Hi, Yes I will, but at the moment i’m on a holiday. I will post this asap when I get back at the end of this month.

Hi, Please see my response above your post.

Hi, Of course I will ask but in the end I think it is cheaper to have it produced in Sweden. That way you can do some test fitting etc to make sure everything fits. This is made by hand so consistency is hard to guaranty and unfortunately I don’t have the time to do the test fitting for you. I...

I think that being outside of Europe may also affect the delay. I order my 4 CT so not an S model in September 2021 and received it mid-December 2021 so all in all 3 months. I’m from The Netherlands so transport from the factory to my dealer only took a few days. Maybe US dealers have been to...

Luckily the extension cord works. That was no fun to make. In the picture you can see that the cable is resting on the frame for the rack but there is no stress on it. I sealed it with some silicone kit and will fill it up with some black kit to make it look better. Other then that everything is...

I had to make a small extension cord for the cable to reach the side. I have just finished it and will test it tomorrow. The plug for the extension is a bit bigger than I hoped so it is real tight. But it fits. I will post an update asap.