OK, so been reading too mnay EV charger manuals, the esense is on the Zappi charger!! I fear it is back to the drawing board!!
What are your thoughts on removing the power input from the mobile charger plus when the car is not charging but plugged it?
The problem with using the current sensor is there is no exporting of power a lot of the time. If the solar batteries are between 15% and 95% charge then the system is disconnected from the grid. At nominally 80% charge I have loads that are turned on for heating and hot water, this can be as...
Andreas
Basically i am just trying to turn the charging on and off remotely. I have a large solar system of 160 panels and just shy of 100kwh on battery storage. When my battery system is at a preset level I want to be able to turn the car charger on and then off when it drops below that. I...
Andreas
Reading the manual for the PMC+ charger it says it will work with the Porsche Home Energy Management System, as the open source software is beyond me I am tempted to try one. Do you know from experience the Porsche Home Energy Management System will not control the PMC+ charger?
As for...
I think from reading i will have the PMC+ as it came with the vehicle so unless someone reading wants to earn some money :please: setting up https://evcc.io/ i'm a bit stuck.
Hoping there is someone a bit clever out there! I want to be able to control my mobile charger via my solar energy manager. It can either give a dry contact relay out or it can send an http command. For instance when i have excess solar i send http://192.168.10.31/relay/0/?turn=on&timer=120 to...
Thanks for the reply, I understand the car may show an error when the charger switched off but why doesn't it come back on when the charger goes back on again?
Hi
I have a Garo wall charger controlled by my own energy management system. If i turn it off through the control relay then turn it back on again the Taycan comes up with a charger error, unplug the charge cable and plug it in again and it works. Any ideas please????