Search results

Checked TYD this morning, I think my Taycan GTS may have made it onto the Glovis Sunlight after all? Current status is now "On Vessel" but TYD oddly still shows an "On Vessel" estimated date of milestone completion for 08/19. Not sure how accurate this update is, but I'm hoping that others also...

Seeing some delay on my end as well. TYD still shows a tentative September delivery - but I'm not counting on it at this rate. My Taycan GTS was supposedly at Emden Port on 07/04 - this was the "actual date of milestone" previously shown in TYD. Interestingly, TYD now shows 08/01 as the actual...

It looks like I need a T25 screwdriver with a really short shaft to take the front panel off. Unfortunately I don't have anything that short in my toolkit but If I can find one around the house, I can definitely get some pictures for you. In the meantime, here's some photos of the unit before...

Thanks! I believe you are correct about that. I mistakingly wrote sub-breaker in my previous response but I meant to say external sub-panel/breaker box (e.g. the dedicated 100A breaker you have in your set-up).

That person who asked a few months ago was me! So I did get the PWCC installed with the advice from @satchurator and @porscheguy - we were able to get all the conduit to enter through the back of the unit as they both mentioned. From what I understand, if you want the PWCC to accept 100A -...

Glovis Sunlight is finally on the move again! Navigation status was "anchored" for almost a week but looks like it has changed to "under way" towards Bremerhaven. Hopefully Emden is next and all of us on the West Coast makes it on board!

Also curious about this. Car: GTS Sedan Arrival in Emden: 07/04 Destination: Seattle (going through Port of Benicia) Potential Ships: 1 Since I'm on the West Coast (US), it looks like my Taycan will likely be on the Glovis Sunlight. Based on the shipping schedules available online, this vessel...

I had the exact dilemma when choosing a color for my Taycan GTS! Carmine Red and Chalk were my top 2 favorite colors. From looking at pictures online, my concern for Chalk was that it can seem too beige in certain lighting - for Carmine Red, I was initially worried that it looked washed out in...

Hm, I also thought we'd be "in the same boat" as well - I'm in Seattle but taking delivery in Bellingham, so our delivery destination is close. If your Taycan is scheduled to be at Emden port on 07/09, I don't see why your car would be on the Platinum Ray instead of the Glovis Sunlight (assuming...

Mine was the complete opposite, went from 30 days to 59 days ? Are you on the East or West coast?

My Taycan GTS arrived at Emden Port on 07/04. Delivery was previously scheduled for 08/12 but looks like I missed the previous ship heading to Benicia, CA. My new "on vessel" date is set for 07/29, expected to arrive at the Port of Benicia on 09/02, and delivery in in the PNW on 09/09.

That’d be a nice surprise! The last update I got on TYD was that it arrived at Emden on 07/04 so hopefully the dates are a little “off” like you said. I’ll keep an eye out if TYD changes over the weekend. Edit: TYD updated and my "on vessel" date is now 07/29. Looks like my Taycan...

Thanks for sharing! My Taycan arrived at Emden port earlier this week and is supposed to be on a vessel today (07/08, per TYD) - so I assume that's the Siem Aristotle? My current delivery ETA is 08/12. However, I'm on the West Coast and TYD also shows that my Taycan is destined to go through...

For some people, it shows up in the My Porsche app/website (not TYD). I followed the instructions in this thread using the Google Chrome browser.

My 2022 GTS (sedan) has just completed production. Don't think I've seen a pic of Carmine Red (with the variable light control panoramic roof) from the assembly process in this thread yet, so wanted to share it with you all. I'm so excited!

TYD updated again for my 2022 GTS - current status on top of the page has changed to "Production Completed" and it's now at the "Ready for Transport" stage! Rest of the dates are still the same and on track for delivery on 08/12 (Washington, USA). Edit: Also got some production pictures from...

TYD just updated for me! I posted about it in the other August delivery thread (since it has more replies) to reduce redundancy.

TYD just updated for me! Current status now shows "In-Production" (was previously showing "Pre-Production"). My ETA also moved up a week from 08/19 to 08/12. The previous Start Production date was 06/03, which has since been updated to 06/20. Looks like things are finally moving along.

Same here, TYD disappeared on me yesterday. I was excited at first because I thought something was being updated… but nope, everything’s back to normal as of this morning and nothing has changed at all ?

Lots of August deliveries in this thread I've also got the same ETA as you. Product was supposed to start on June 3rd but TYD hasn't updated for me yet.