Sponsored

Child Safety Lock Error on Dash

Mission C

Active Member
First Name
Mike
Joined
Jan 22, 2022
Threads
2
Messages
43
Reaction score
47
Location
Winter Park, FL
Vehicles
22 Taycan RWD, MB GLS450
Country flag
I get a Child Safety Lock error at startup every time now. The rear safety lock is engaged on the passenger rear side only such that you can't open that one door from inside. The button on the driver's door is unresponsive (the light doesn't engage upon pressing). Restarting the car doesn't do anything. I've reached out to my SA but haven't heard back. Anyone had this issue and found a resolution? Thanks
Sponsored

 

W1NGE

Well-Known Member
First Name
Adrian
Joined
Jan 11, 2021
Threads
53
Messages
11,016
Reaction score
6,805
Location
Aberdeen, Scotland
Vehicles
992.2, ex GTS ST owner, Macan T
Country flag
I get a Child Safety Lock error at startup every time now. The rear safety lock is engaged on the passenger rear side only such that you can't open that one door from inside. The button on the driver's door is unresponsive (the light doesn't engage upon pressing). Restarting the car doesn't do anything. I've reached out to my SA but haven't heard back. Anyone had this issue and found a resolution? Thanks
Sorry not had that issue.
 

TampaPete

New Member
First Name
Peter
Joined
Aug 27, 2022
Threads
0
Messages
1
Reaction score
0
Location
Tampa Florida
Vehicles
'98 993 / '67 912 / '07 911 / 2023 Cross Turismo
Country flag
Hi Mission C,

I picked up my Taycan 2 days ago.....I have same Child Lock error code for passenger rear door.....could you tell me how it was resolved? I really don't want to book a service appointment for this if avoidable.
Thanks, Peter
 

JAM01

New Member
First Name
Justin
Joined
Mar 7, 2023
Threads
0
Messages
1
Reaction score
0
Location
USA
Vehicles
Taycan, BMW
Country flag
I had the same issue recently. The child safety stayed in error mode and would not let passengers have any control while in the backseat. I fixed it by resetting the 12Volt rail. Under the frunk I removed the plastic behind the storage compartment and loosened the 12mm nut holding on the negative cable to the 12Volt battery. This reset the 12 volt system and everything is fine so far.
Sponsored

 
 








Top