📸 How to Find Your Taycan Production Photo From Assembly Line

[X88]

I’m in the same boat… just two photos for me as well. Some people have four. I’m using an iPad, you?

Chrome on a MacBook Pro ...

Sponsored

 

[action-ant]

For the folks who already got their vehicles, are you still able to see the factory photos on the website?

 

[Hegi]

Does this actually means that the car is already produced ?

 

[goofysurfer]

Does this actually means that the car is already produced ?

From my experience, no.

 

[KoSoVaR]

Does this actually means that the car is already produced ?

I have the same orderState status on my Taycan GTS Sport Tourismo but no pictures. The ETA to production completion is 7/22. I'm going to go ahead and also say probably not, especially since I don't have any production pictures.

Chrome on a MacBook Pro ...

In the Chrome browser on a MacBook Pro, you can bring up the interface by pressing CMD+OPTION+J. A foreign looking screen full of tools will pop up on the right size. You can drag/resize it if you wish or close it altogether.

Once open, look along the top and click the `Network` tab.

Then on the left side (your browser), refresh (CMD+R) the "Discover Current Phase" page and you will see a bunch things populate in the Network pane.

Now press CMD+F to find, and paste in the box "orders?include-full-content=false".

Then immediately under the search box, click the line starting with URL ...

You'll then need to click the Preview tab on the most inside pane, not on the top. Once you're in preview, you will be able to expand the line that says 0: {orderID... blah blah

Attached a crappy screenshot, hope it's a little helpful

 

[X88]

I have the same orderState status on my Taycan GTS Sport Tourismo but no pictures. The ETA to production completion is 7/22. I'm going to go ahead and also say probably not, especially since I don't have any production pictures.



In the Chrome browser on a MacBook Pro, you can bring up the interface by pressing CMD+OPTION+J. A foreign looking screen full of tools will pop up on the right size. You can drag/resize it if you wish or close it altogether.

Once open, look along the top and click the `Network` tab.

Then on the left side (your browser), refresh (CMD+R) the "Discover Current Phase" page and you will see a bunch things populate in the Network pane.

Now press CMD+F to find, and paste in the box "orders?include-full-content=false".

Then immediately under the search box, click the line starting with URL ...

You'll then need to click the Preview tab on the most inside pane, not on the top. Once you're in preview, you will be able to expand the line that says 0: {orderID... blah blah

Attached a crappy screenshot, hope it's a little helpful

Thanks for the succint notes and useful screenshot ... wish I had them when I was first trying to do this as it would have saved me a bit of time!

FYI I did eventually manage to work my way through on my own, calling up the developer tools by using right-click Inspect on the MyPorsche Overview page. Was able to pull up two photos of my car on the assembly line since about 06/28, but despite checking back daily have not seen the third photo (from the side) show up yet.

 

[Hegi]

I have the same orderState status on my Taycan GTS Sport Tourismo but no pictures. The ETA to production completion is 7/22. I'm going to go ahead and also say probably not, especially since I don't have any production pictures.



In the Chrome browser on a MacBook Pro, you can bring up the interface by pressing CMD+OPTION+J. A foreign looking screen full of tools will pop up on the right size. You can drag/resize it if you wish or close it altogether.

Once open, look along the top and click the `Network` tab.

Then on the left side (your browser), refresh (CMD+R) the "Discover Current Phase" page and you will see a bunch things populate in the Network pane.

Now press CMD+F to find, and paste in the box "orders?include-full-content=false".

Then immediately under the search box, click the line starting with URL ...

You'll then need to click the Preview tab on the most inside pane, not on the top. Once you're in preview, you will be able to expand the line that says 0: {orderID... blah blah

Attached a crappy screenshot, hope it's a little helpful

I also think it means sheduled for production rather then already in production.

 

[RAHRCR]

If anyone has been able to pull their photos from a MAC or Ipad, it would be awesome to see the complete “how to”. I have tried by working through this thread but am getting stuck. Big thanks in advance.

 

[KoSoVaR]

If anyone has been able to pull their photos from a MAC or Ipad, it would be awesome to see the complete “how to”. I have tried by working through this thread but am getting stuck. Big thanks in advance.

Did you follow my directions for Chrome on Mac? Where are you getting stuck?

 

[RAHRCR]

Did you follow my directions for Chrome on Mac? Where are you getting stuck?

Yes I did this:

In the Chrome browser on a MacBook Pro, you can bring up the interface by pressing CMD+OPTION+J. A foreign looking screen full of tools will pop up on the right size. You can drag/resize it if you wish or close it altogether.

Once open, look along the top and click the `Network` tab.

Then on the left side (your browser), refresh (CMD+R) the "Discover Current Phase" page and you will see a bunch things populate in the Network pane.

Now press CMD+F to find, and paste in the box "orders?include-full-content=false".

Then immediately under the search box, click the line starting with URL ...

You'll then need to click the Preview tab on the most inside pane, not on the top. Once you're in preview, you will be able to expand the line that says 0: {orderID... blah blah

******
After you do this, how do you review the photos?

 

[KoSoVaR]

******
After you do this, how do you review the photos?

You'll need to look towards the bottom on the right side pane (make sure you're in preview mode). If you see: productionImages: null, there are no pictures. If you see a + sign, expand it, and you'll see a few URLs and you should be able to copy/paste or click them.

 

[TDinDC]

For the folks who already got their vehicles, are you still able to see the factory photos on the website?

Despite having had my vehicle for over a month, my app still shows "scheduled for production" and there are no photos . . .

 

[KoSoVaR]

Despite having had my vehicle for over a month, my app still shows "scheduled for production" and there are no photos . . .

I'm actually in a similar situation. Track my Dream status was updated yesterday to en route to embden. No pictures. Also Track My Dream says I have a 911 coming, but it's a Taycan GTS ST .

I think it's all broken.

 

[RAHRCR]

You'll need to look towards the bottom on the right side pane (make sure you're in preview mode). If you see: productionImages: null, there are no pictures. If you see a + sign, expand it, and you'll see a few URLs and you should be able to copy/paste or click them.

Thanks. The production images line does say “null”. Do you know if this means that they will never appear or that they are not loaded yet?

 

[KoSoVaR]

Thanks. The production images line does say “null”. Do you know if this means that they will never appear or that they are not loaded yet?

Just means they're not loaded. But based on current experience and what was just posted by #117 - maybe we'll never see them.

Sponsored