Search results

Sorry for coming back to this post... Talking about the rubber stoppers, it seems yours are completely screwed in... Do you think when the bonnet is closed they touch on the bumper trim or you think your bonnet is seating only on the frunk gasket? I don't know if it is better to make the bonnet...

Exactly this! My 4S was to have the electric but I have the manual.

I think the same will happen to me....

YES! Lock the car and then press on the key the lock and unlock buttons together for a couple of seconds. Key will blink red and you have disabled confort access until the next time. you will have to open the car with the key in order to re-enable confort access

Being this I assume it would not be available to buy through FOD since you are missing hardware...

can you explain me the difference between having 1 and 2 buttons? you are referring to hardware they did not accidentally give me... do you mean that for confort access 2 buttons are required? I don't understand

on the internal boot 1 close button

Hi, on my 4S I have confort access enabled and working (handles lift when I approach, trunk and front trunk open with gesture), but I did not spec it in my configuration... When I log into My Porsche from the browser, it shows me I can buy the service through FOD. Is anyone able to explain me...

Little update... Tried shimming one side of the bumper and seems it solved pretty much everything. Also I noticed that the gasket around the frunk was not perfectly seated (the little lip that holds the plastic covers around) and seated well it all around. Now, this is the result. It seems ok at...

I just set a general profile with minimum charge at 85% no timers needed. If I need to charge more than 85 I enable direct charging

Italy down

Hi, is this normal on a brand new Taycan 4S with performance Battery plus? 366 Km equal to 227 miles A friend of mine, with Cross Turismo al 100% has 410 Km or 254 miles

wow super, thank you, your's almost perfect

Same as mine, from these pictures you can't tell. It is only visible from front-low

Wow, your is perfect and the stoppers are all in, so is the perfect condition. I placed side by side my Taycan and 007,s one and they are the same... I also saw many pictures of Taycan on internet with the same issue. I guess it is within spec, and I don't know if making the dealer try to...

Wow, is it possible to see a pic of yours?

Hi, tried to play with the rubber stoppers. Something changes, if I leave the stopper on the higher side all in and completely unscrew the stopper of the lower side. In this way it aligns pretty well, but I feel strange that the stoppers have to be completely out on one side and completely in on...

Looking at the picture you attached, I was wandering if, putting a shim or washer underneath the bumper bolt of the bumper on the side where mine sits lower would help rising it that little bit that is needed to go even with the other side...

Thank you for your explanations. If I unscrew the rubber bumpers nothing changes, I mean, on the side where the bonnet is higher the rubber bumper is already all in, and on the opposite site if I unscrew nothing changes. After 3 complete turns the rubber bumper falls off. I also noticed that’s...

Yes, my guess is that is the bumper since the hood alignes perfectly with the fenders. I sent the picture to the dealer and they’re going to check. Do you think it will be better to keep it like is in order to avoid worse problems or aligning the bumper is an easy task?