Search results

Thank you. If the negative terminal is disconnected for an extended period, will any components or settings be lost?

Thanks Steve, so charging the main battery to around 50%, and if possible, starting the car once a week or every two weeks should help keep the 12V battery charged.

I'd like to ask if anyone has experience leaving their Taycan parked for up to 6 months without use. I’ll be on an overseas assignment in the U.S. for a while (about 6 months), and before I leave, I plan to charge the high-voltage battery to at least 85%. What I’d like to ask is: Will the 12V...

Yes they replaced for me with no cost. But issues not fix.

I have the same issue—there’s a strange noise coming from the front left wheel near the driver’s seat when turning (Left Hand Drive). I had it checked while replacing the brake hose during ARB0 recall, but the situation actually got worse… The noise is gone, but now it shakes and vibrates...

I have placed an order for a set for my Taycan RWD and look forward to its arrival. Once I’ve finished the installation, I’ll be sure to share my driving impressions with everyone! ?????????

What I'm curious about is this: if I agree to allow Porsche to collect vehicle data, will the modifications I've made such as ACC, Bose, or Matrix LED also be exposed during the automatic data upload to their server?

Thanks Bro, 你的中文真好! ? When the ARB0 recall was conducted previously, I heard that the WPL8 replacement (which is the front passenger heater you mentioned) was also carried out at the same time.

Hi Sir, WP0ZZZY1ZPSA01217

I can totally relate to this. When I use an AC charger with more than 11kW, it triggers a red error and fails to charge in less than 30 minutes. However, if I reduce the power to 9kW, the charging completes successfully up to 100%. This issue has been bothering me for a while, especially since...

The response I got from RedShift Your car from the factory can make about 402 hp in overboost for a few seconds (~2.5s) during launch control. With our upgrade you can expect a 20% increase in peak power performance and that will be available at all times and not just during launch control.

I am not using Porsche Mobile Charging Connect. The OBC is the biggest issue….

My experience is: haste makes waste. The 22kW AC-DC onboard charger (OBC) tends to run into issues, often preventing the car from charging properly. Sometimes, after plugging in the charging gun, it throws a charging error (with a red warning) just 30 minutes later. You go to bed thinking you'll...

maybe eBay?!

????? If I can drive 650 km/hr. -> it means the rear spoiler never retracts! Yes only S0, S1, S2, S3 takes effect

I had the chance to try the clone version last week—it's quite an intriguing piece of work. You will need PIWIS 3 and PTG3 (the connector).

You can use PIWIS to change the value with speed <-> spoiler. When the speed does not meet the conditions, the tail will not deploy.

Change from Distance 3 (Default) to 1 ACC->Kodierwert->CarMenu_distance_basic_setting -> Distance 1

Thank you, superhero! I thought PIWIS could only run on a specific notebook, but it turns out it can be installed manually, just like how I used to code BMW with E-sys.

That's awesome, thanks! I've been thinking about buying a clone PIWIS 3 recently to adjust the configurations.