bah1590
Well-Known Member
- First Name
- Bob
- Joined
- Nov 19, 2021
- Threads
- 16
- Messages
- 228
- Reaction score
- 179
- Location
- Southern California
- Vehicles
- Taycan CT4
- Thread starter
- #1
How does everyone us their passenger display?
Sponsored
How can you do that without passenger?I use the multiview; when I am going on a longer drive, I will activate it even when there is no passenger. Admittedly, I still almost never look at it. It's not especially useful in my view, because the things you can use it for are quite limited.
I have the same question. I want to have the screen also on when there is no passenger on the seat. Easiest is probably to shortcut the switch in the seat I reckonHow can you do that without passenger?
It happened once (I didn't do anything) when it was on during the whole journey, almost an hour, but as far as I know, it should work only when passenger sit ...
It could be useful to have it on the whole screen, since there are useful info about traffic jams, etc...
@whitex : afaik, no... at least not automatically.
I have the same question. I want to have the screen also on when there is no passenger on the seat. Easiest is probably to shortcut the switch in the seat I reckon
Thanks! I'll missed this post, I will give it a try. Thanks again!It's explained here somewhere by a competent user, not me - I can't find it anymore (I think it was in a debate last April on the Taycan big software update WMA something..) see the picture.
it works. you need to do it every time you turn the car on.
![]()
Great!It's explained here somewhere by a competent user, not me - I can't find it anymore (I think it was in a debate last April on the Taycan big software update WMA something..) see the picture.
it works. you need to do it every time you turn the car on.
![]()

Just tried it. The first method didn't work but the second works like a charm!!!It's explained here somewhere by a competent user, not me - I can't find it anymore (I think it was in a debate last April on the Taycan big software update WMA something..) see the picture.
it works. you need to do it every time you turn the car on.
![]()
Just tried it. The first method didn't work but the second works like a charm!!!