Recommendations: 10/15mm Spacers for Mission-E wheels?

[djfrestyl]

Hey all,

I've got a 4S with Mission-E's. The car really needs some spacers and I think 10mm front / 15mm rear will be perfect to get the flush look.

Looking for recommendations on where to procure? I'm in the US and would like a set with appropriately sized extended lugs in black. Hubcentric of course!

Usually I get H&R but looks like they only offer 7mm/14mm.

Anyone have positive results from 4wheelspacers.com? Anyone have any other recommendations?

Thanks in advance?

Sponsored

 

[PCASSOO]

I bought these for my back tires.
They have been great and the Lug nuts we're perfect.
Good Luck

 

[djfrestyl]

Thanks!

Per H&R, looks like center bore is 71.6. These seem noted as 71.5 - as do many others. Interesting that a smaller bore fits. Tighter is of course better even by .1mm!

 

[djfrestyl]

Just bumping this. Anyone have any other thoughts or suggestions?

 

[nischalr]

Just bumping this. Anyone have any other thoughts or suggestions?

https://flat6motorsports.com/produc...r-bolt-kit-taycan?_pos=2&_sid=8ba22fcef&_ss=r

This link is for a package with 14mm in front and 15mm in back but I called them up and got H&R 15mm spacer for all 4 corners on the GTS with 21” wheels (same spec as mission E wheels) and rear axle steering and it looks perfect and have no clearance issues in all circumstances even in low mode.
I like keeping the spacing equal from front to back, and the H&R were top quality as always.

These guys have done many Taycans with spacers and wheels and are familiar with the car.

Pictures are always hard for spacers, but I like a flush look, and no rubbing and it’s perfect to my eyes. Some have done 20mm, but too risky to me.

Sponsored