Search results

Thanks for the heads up. I updated my Android version after seeing your post, and it works much better.

Don't mind the bubbles. It wasn't worth putting in any more effort when I saw the red film was a flop.

I decided on the driver's side because it was better for my line of sight. I very rarely use my phone in the horizontal position so the potential problem of the phone blocking the PCM display wasn't an issue for me. If you use the phone in the horizontal position, I can see how mounting it on...

Today, I installed the ProClip mount with the Qi charger. I tried it on both the passenger and driver sides, and ultimately decided on the driver's side. It was a super easy install. The power is from the 12v outlet in the armrest. The outlet shuts down 30 minutes after the car powers down...

I got the red film, but it was a flop. Unlike your blue film, the red had too much tint against the black background.

I ordered samples of 4 different green vinyl wraps (3M 1080 and VViViD) with my fingers crossed that one would match my Mamba Green. Success. The matte green from VViViD vinyl was super close to Mamba Green. I ordered VVivid+ Matte Metallic Green (Ghost) and the Matte Metallic Lime Green from...

I totally screwed up the order of things. I started at step 3, jumped to step 13 (without even seeing one in person), and remain at step 14 after taking delivery this past April.

If you are referring to the time on the charging screen, it is my understanding that it reflects the time when the charging will be completed based on a profile if AC charging and 100% if DC charging. So if the time is an hour later than the current time, then the charging will be finished in...

Your question regarding the Porsche Mobile Charger Connect is a dilemma I have too. I left my PMCC plugged into the Taycan, but at a reduced amperage. Instead of 40A, I turned mine down to about 24A to avoid any issues with the heat issues discussed elsewhere on the forum. However, I received...

I will be installing a very similar ProClip install as @LonePalmBJ but with the Qi charger at the end of the week when I am back in town. I was planning to install it on the driver's side (left in US), but after seeing the pics, I might install it on the passenger side since the mount is...

The particular OBDII adapter I am using states that it should not be used with chargers over 3A. The instructions indicate that the use of a larger charger can damage the OBDII port. I did not investigate it further. My main goal was to find a connection that would still allow a trickle...

Instead of 50% for the high volt battery, I would charge it closer to 85%. There is very little phantom drain on the Taycan, but it will loose some charge during the 2 months. Trickle charging is easy to do. I have had my Taycan on a trickle charger for several weeks at a time. It is...

I agree the Porsche version seems pretty lame especially for the cost for 4 doors. I installed some aftermarket ones on my Maserati for 4 doors for under $60.

I have the basic mount. It looks very similar except for the cord guide at the top. I remember pressing the two pieces together during assembly.

Like you, I was also wary of breaking clips. That was the main reason why I didn't want to do the mirror tap method. The only panels that I removed were the covers to the fuse panels that you see in the pictures. The one for the foot well can be removed by getting your fingers under one side...

I have the standard glass. I think a small detector like the Radenso Pro M will work in the non insulated area. Good luck. My V1Gen2 seems like it would be okay too. I feel much better running the Taycan with the detector. Waze has become too spotty lately.

Sounds good. I'll send you a PM.

It is similar in the States although the penalties are generally not as harsh. These types of device holders are fairly common to comply with the hands free requirement. However you cannot do things such as sending SMS, emails, etc. You can use it as a passive display or to have a hands free call.

Correct, I will plug the power connection in the arm rest. I should be able to run the wire under the trim pieces without much trouble (I am currently out of town so I won't do the actual install until the 18th). Without Android Auto I need visibility to the phone. I run an app JBV1 that is...

@Dee it looks awesome. I ordered some red tint to try on mine (the blue looks good on the prototype and your car, but it will clash with my Mamba Green).