Search results

Option 1 by far. I wouldnt even consider option 2.

To be very honest I cant even rememer what way I have them on. I'll need to have a look. Fitted them shortly after taking delivery last year after reading 10 & 15 was the way to go. I bought them from two different sellers on eBay.

I have a Hypervolt which is quite slim, tethered and allows you to wrap the cable around the charger. I bought an angled pluger holder that someone had 3d printer on Etsy that keeps everything flush. You can dim or turn off the LED altogether if you find it too jazzy.

I'm 15 and 10mm on a GTS saloon. The rears could easily handle 20 though I think, but don't think I'd be comfortable running spacers that thick. @Persuader - Nice wheels. I had those in the same finish on my M5.

Im talking about depreciation percentages on the used car market vs new. Not on dealer/manufacturer incentives.

Sorry I meant EQE.

The issue is that the used market for EVs in the UK is tiny compared to the market for new ones, thanks to the government incentives. Also that SUVs continue to be in significantly more demand than saloon cars (in the UK) Hence why the Mercedes EQE is holding its value much better than the...

Taycan depreciation in the UK is fueled by one thing and one thing only. Government EV incentives coupled with a desirable premium brand. This has created a scenario where a £100k Porsche is readily accessible to a market that otherwise wouldn't buy one. According to my dealer, 90% of all new...

I use carplay all the time. Used this for 2 minutes for a quick play around and I doubt I'll ever use it again.

Correct. If you're doing this. Make sure you do it in Normal mode on a level surface.

No. The opposite. What you're doing is telling the module that the current height is actually higher that it really is, so that it reduces the height to get back to the correct level. So, you would increase it from 410mm to 420mm for a 10mm drop.

I've done this. An important thing missed from above is that in order to make adaptation changes using VCDS with certain control modules, the correct security access code is required. On module 74 the code "20103" will be accepted but in my experience these don't make the required changes...

Anyone due to collect their Taycan tomorrow only for it to be cancelled? Every Taycan at Porsche Glasgow has been put on a stop-sale apparently. Anyone been told anything noteworthy? Reasons etc?

Surely they are liable for the cost of a new door card?

That looks like water has gotten into the stitch seem and behind the leather.

15mm front. 10mm rear. Can’t remember the bolt lengths. Just remove one and add the difference.

You need to remove it or you’ll most likely damage the black plastic section that it plugs into it. It’s quite soft.

I've now created a comprehensive guide on how to do this which can be found here: https://www.deutschespeed.com/threads/taycan-front-lip-replacement-complete-guide.1107/

Leather conditioner = Snake Oil. https://en.wikipedia.org/wiki/Snake_oil Rub this on to your exterior body work and tell me if it conditions the paint.... No? Because modern automotive leather is painted. It's not porous in any way. All youre doing is rubbing on a sticky layer that sits on top...