Cupholder replacement

[Rob Scott]

Hi all, I did a quick search here on the Forum on this topic and didn’t find much. I need to replace the cupholder on my Taycan and I was wondering based on your experiences, if this is a DIY job or something I should have done by the dealer? Thank you in advance for any input you have for me on this.

Sponsored

 

[SoccerMan94043]

Hi all, I did a quick search here on the Forum on this topic and didn’t find much. I need to replace the cupholder on my Taycan and I was wondering based on your experiences, if this is a DIY job or something I should have done by the dealer? Thank you in advance for any input you have for me on this.

This might help you make a decision (not sure how far you want to go with that, but it seems like it could be DIY to me):

 

[JTMC]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

 

[Rob Scott]

This might help you make a decision (not sure how far you want to go with that, but it seems like it could be DIY to me):

TY!

 

[Rob Scott]

This might help you make a decision (not sure how far you want to go with that, but it seems like it could be DIY to me):

TY!

 

[Rob Scott]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

TY!

 

[Rob Scott]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

TY!

 

[Rob Scott]

This might help you make a decision (not sure how far you want to go with that, but it seems like it could be DIY to me):

TY!

 

[Rob Scott]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

TY!

 

[Rob Scott]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

TY!

 

[Rob Scott]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

TY!

 

[Rob Scott]

That piece is quite easy. I replaced the armrest a few months back to one with a logo.... absolute nightmare! 1/10 do not recommend!

The cupholder is relatively easy. You just have to pull upwards on it like your life depends on it and it'll come off.

See here.

TY!

Sponsored