Part 1: MapEV Diag

[prj]

Good news. I have scanned a J1.2 E-tron GT today and everything works normally including clearing faults and reading ASG data.

The gateway does not block access over DoIP, so unlocking SFD2 is not needed when using the ENET cable.

Sponsored

 

[Hirschaj]

I have the exact same setup and can confirm that the program works without any problem.... exactly as it would work on any native Windows laptop.

Yep, confirmed working with my $13 cable. ?

 

[Mr.Smith]

Good news. I have scanned a J1.2 E-tron GT today and everything works normally including clearing faults and reading ASG data.

The gateway does not block access over DoIP, so unlocking SFD2 is not needed when using the ENET cable.

Any noticeable differences with the J1.2 ASG compared to the J1?

 

[prj]

Any noticeable differences with the J1.2 ASG compared to the J1?

From a diagnosis standpoint no. From the controller standpoint, I don't know yet. I ordered one, will have it next week.

 

[Porsche-Guru]

As a reference, Part 3 is now up...

Part 2
Part 3

 

[Voltaire]

Good news. I have scanned a J1.2 E-tron GT today and everything works normally including clearing faults and reading ASG data.

I got a cable today and confirmed that the application works on my J1.2 Taycan also. It found 43 modules, and read all of them in about 10s. I was also able to clear faults, and the read ASG button appears to work too.

Thank you for this app!

 

[prj]

I got a cable today and confirmed that the application works on my J1.2 Taycan also. It found 43 modules, and read all of them in about 10s. I was also able to clear faults, and the read ASG button appears to work too.

Thank you for this app!

If it is not too difficult for you, could you also upload the data to the server? I am curious about the ASG info.

 

[pimp]

UTM on Macbook M3 Air works first try, with an amazon ODB cat5 cable.

But trying to read ASG info it has an error ( what ever ASG is ).

I did try twice.

[12:26:58] DoIP Discovery...VIN: WP0ZZZY1ZNSAXXXX IP: 169.254.247.246
[12:26:58] Connecting... OK
[12:26:58] Searching for control units...
[12:27:00] Found 23 control units, scanning...
[12:27:05] Scan complete.
[12:27:05] Some DTC data is missing, downloading from server... success!
[12:28:47] Connecting... OK
[12:28:50] Connecting... OK
[12:28:50] Reading ASG data...
[12:28:50] Connecting... OK
[12:28:50] Reading ASG data...
[12:28:53] ERROR: No response for request: 22 F1 87
[12:28:53] ERROR: No response for request: 22 F1 87
[12:29:38] DoIP Discovery...VIN: WP0ZZZY1ZNSAXXXXX IP: 169.254.247.246
[12:29:38] Connecting... OK
[12:29:38] Searching for control units...
[12:29:39] Found 22 control units, scanning...
[12:29:44] Scan complete.
[12:29:49] Connecting... OK
[12:29:49] Reading ASG data...
[12:29:52] ERROR: No response for request: 22 F1 87

 

[prj]

UTM on Macbook M3 Air works first try, with an amazon ODB cat5 cable.

But trying to read ASG info it has an error ( what ever ASG is ).

I did try twice.

[12:26:58] DoIP Discovery...VIN: WP0ZZZY1ZNSAXXXX IP: 169.254.247.246
[12:26:58] Connecting... OK
[12:26:58] Searching for control units...
[12:27:00] Found 23 control units, scanning...
[12:27:05] Scan complete.
[12:27:05] Some DTC data is missing, downloading from server... success!
[12:28:47] Connecting... OK
[12:28:50] Connecting... OK
[12:28:50] Reading ASG data...
[12:28:50] Connecting... OK
[12:28:50] Reading ASG data...
[12:28:53] ERROR: No response for request: 22 F1 87
[12:28:53] ERROR: No response for request: 22 F1 87
[12:29:38] DoIP Discovery...VIN: WP0ZZZY1ZNSAXXXXX IP: 169.254.247.246
[12:29:38] Connecting... OK
[12:29:38] Searching for control units...
[12:29:39] Found 22 control units, scanning...
[12:29:44] Scan complete.
[12:29:49] Connecting... OK
[12:29:49] Reading ASG data...
[12:29:52] ERROR: No response for request: 22 F1 87

I think this doesn't work properly in the virtual machine. The number of control units is too low and the errors in reading the part number make no sense either.

 

[pimp]

oh thats a shame, i will dig out an old windows machine and try again. Thanks!

 

[Voltaire]

If it is not too difficult for you, could you also upload the data to the server? I am curious about the ASG info.

Done. WP0AB2Y17SSA40738.

 

[prj]

Done. WP0AB2Y17SSA40738.

Thank you!

 

[Rik_CT4s]

Quite a few uncleared errors here, most could be cleared (done), 2 left that cannot be cleared. Anyone any idea what this is about?

error 1: chassis control, error 2: brakes related

 

[prj]

That cooling flap error I have seen on every single Taycan that I have scanned.
Mine included.

I have no idea why it happens.

Btw use copy-paste, if you need to transfer from computer to computer you can save the report to a .txt

 

[chun]

That cooling flap error I have seen on every single Taycan that I have scanned.
Mine included.

I have no idea why it happens.

Btw use copy-paste, if you need to transfer from computer to computer you can save the report to a .txt

Taycan's built for the chinese market come with some aditonal air-intake/flap. Could be related to that.

Sponsored