NewtownPCar
Member
- First Name
- Tom
- Joined
- Aug 27, 2023
- Threads
- 1
- Messages
- 10
- Reaction score
- 12
- Location
- Newtown, PA, USA
- Vehicles
- 2015 981S, 2019 BMW X3 M40i, 2023 Taycan 4S CT
- Thread starter
- #1
Hi all - hope someone has an idea on this. I have a 23 4S CT, have had it about 6 months. I’ve been AC charging it at home no issue - when I get home from work, whatever SOC it’s at, whatever time it is, I plug it in and it charges reliably to 85%. 2 weeks ago I had it plugged in at home, and it finished charging. I released the plug, and went about doing something else. I happened to notice a couple minutes later that the charge port door hadn’t automatically closed. I got in the car and saw the yellow warning error “CheckCharging port - see owners manual”. I *think* I swiped the port door and it closed fine, but the error remained. I turned the car on and off a couple times and the error cleared.
As it happens, I was able to AC charge the next two times, near my work. Those sessions went fine, 150 kw each time (max at those EA chargers). Well, come to this weekend, I’m home and I plug it in, and the center console comes on with the charging display and says “Charging process complete “.
So that’s my problem - it just goes right to “complete”. No errors. Battery was at 72% earlier this weekend. I thought maybe it was just to close to 85%. I drove it a bit down to 65%, and same issue - won’t charge, when I plug in it says “charging complete”.
No custom profiles, only the general profile with minimum set to 85%. I haven’t touched the profiles since day 1 so shouldn’t have changed.
Any ideas? Sounds like next trip is to the dealer service, but wondering if I somehow am doing something stupid (wouldn’t be the first time ).
Thanks in advance!
As it happens, I was able to AC charge the next two times, near my work. Those sessions went fine, 150 kw each time (max at those EA chargers). Well, come to this weekend, I’m home and I plug it in, and the center console comes on with the charging display and says “Charging process complete “.
So that’s my problem - it just goes right to “complete”. No errors. Battery was at 72% earlier this weekend. I thought maybe it was just to close to 85%. I drove it a bit down to 65%, and same issue - won’t charge, when I plug in it says “charging complete”.
No custom profiles, only the general profile with minimum set to 85%. I haven’t touched the profiles since day 1 so shouldn’t have changed.
Any ideas? Sounds like next trip is to the dealer service, but wondering if I somehow am doing something stupid (wouldn’t be the first time ).
Thanks in advance!
Sponsored