19.2 Charger installed

[JRNJTAYCAN]

Question, just installed my new Porsche 19.2kw home charger. My car is at 74% when I pulled it in
When charging I have the setting max to 80a on a 100a breaker.
I am only getting 10.4 kw into the car. Should it not be 19.2?

Sponsored

 

[TaycanCook]

Did you option the 19.2kw onboard charger?

 

[magnitude]

If not, you can retrofit it through Suncoast Parts apparently.

 

[nebur]

https://www.suncoastparts.com/product/sku9j1accu.html

$1,795.00 not sure about the install

 

[daveo4EV]

standard Taycan is 11 kW (48 amps) - 19.2 kW is a $1680 factory option or a $5000 dealer service retrofit

based on the screen it appears your vehicle does not have the optional 19.2 kW option.

 

[JRNJTAYCAN]

standard Taycan is 11 kW (48 amps) - 19.2 kW is a $1680 factory option or a $5000 dealer service retrofit

based on the screen it appears your vehicle does not have the optional 19.2 kW option.

Crap! How can I tell what my car has? I can’t find my spec sheet right now.

 

[daveo4EV]

login.porsche.com you can download a PDF of your spec sheet.

or there are vin decoders

https://www.[Banned Site].com/threads/2021-porsche-vin-decoder.2224/

 

[daveo4EV]

Crap! How can I tell what my car has? I can’t find my spec sheet right now.

your car is behaving exactly inline wiht expectations for the "standard" included onboard charger - your PWCC shows 46.8 amps - which is just shy of 48 amps (expected) for 11 kW "raw" charge rate.

the PWCC will charge other EV's at a full 80 amps if those EV's have 80 amp (19.2 kW) support.

the install is a one and done thing and good for future EV charging - you are future proof.

 

[JRNJTAYCAN]

Thank you for everyone.

 

[vroomer]

@JRNJTAYCAN

May I ask if you flush mounted with wiring from behind or used surface conduit?
If you flush mounted, how did the electrician interface the in-wall conduit to the unit?

Sponsored